While recovering from rotator cuff sugery I've been trying to put the down time to good use.
One of the projects is to work on the fundamentals of Enroute software.
I've taken a chapter out of Dan Sawatzky's play book, (I recommend this practice to any one using Enroute).
In This project I'm making letters from A-Z , these are approximately 8"x8"
and all cut from "High Density Urethane Foam" (sign foam).
To Build each letter I'm using different techniques starting with the design process to the finishes.
One of the projects is to work on the fundamentals of Enroute software.
I've taken a chapter out of Dan Sawatzky's play book, (I recommend this practice to any one using Enroute).
In This project I'm making letters from A-Z , these are approximately 8"x8"
and all cut from "High Density Urethane Foam" (sign foam).
To Build each letter I'm using different techniques starting with the design process to the finishes.
I started this project prior to starting this blog so I'll try to recreate the process as best I can.
As I write this first installment to this catagory (A to Z),
I have actually just completed cutting the last letter Z.
please follow along and add coments
As I write this first installment to this catagory (A to Z),
I have actually just completed cutting the last letter Z.
please follow along and add coments
RSS Feed
