![Picture](/uploads/1/0/2/0/10200590/1994866.jpg)
If you look closely you can see the added piece and the rope appearing as it is carved.
I actually run this same file twice on the Mulitcam CNC router to give me both sides of the sign.
![Picture](/uploads/1/0/2/0/10200590/9311775.jpg)
A little pipe here, some threaded rod there, a couple of links cut from a scrap piece of chain and presto, the structural hanging pieces are done.
![Picture](/uploads/1/0/2/0/10200590/4569386.jpg)
![Picture](/uploads/1/0/2/0/10200590/134770.jpg)
alot pf pressure here !!!!!
or should I say
"The big Squeeze"
![Picture](/uploads/1/0/2/0/10200590/6067382.jpg)
Using Sculpting epoxy clay, I've added some detail to the Sign (note the Rivets)and some shape to the Sampson posts.
![Picture](/uploads/1/0/2/0/10200590/4080651.jpg)
I'm hoping I'll be able to post some photos after he has completed the finishing procss.
I crated and shipped it.
THE BARGE HAS LEFT PORT DESTIN FOR IT'S NEW HOME ON SHELTER ISL. NEW YORK.