Here is a mock up of the sign back panel with Raised text and the logo which will be stood off the back panel by about 1/2".
It's starting to come together.
It's starting to come together.
this is the back of the logo section with the stand offs glued in.
I first drilled a hole in the back of the logo pc., then I inserted a carriage bolt in the hole with some 2 part urethane adhesive and over the bolt I used a piece of pvc pipe as a spacer.
In this shot you can see the square blocks that I used to keep these standoffs straight until the adhesive had a chance to cure.
We're getting close to paint How exciting. Stay tunned.
I first drilled a hole in the back of the logo pc., then I inserted a carriage bolt in the hole with some 2 part urethane adhesive and over the bolt I used a piece of pvc pipe as a spacer.
In this shot you can see the square blocks that I used to keep these standoffs straight until the adhesive had a chance to cure.
We're getting close to paint How exciting. Stay tunned.
RSS Feed
